干燥剂罐

Desiccant Canister

2024-04-23 21:52:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this remix for a few reasons. I enjoy the design and how well it went together. The fit of the lid was everything that I was hoping for. I had just run into a few issues with the design.

Firstly, because my vacuum bags can be temperamental. I removed the writing on the top so that it would be no risk of it abrading the bag air was being removed. it also meant that the lid could be printed on the large flat top instead.

Second, I needed it to sit inside of the spool when they are being stored. The original was larger then the spool protruding out the top. So, instead of making the entire canister at 75% scale, I removed the extra height for the can making it sit flush to the spool.

Lastly... I wanted a funnel make the entire process of filling them easier.