相机壳

camera case

2024-04-24 01:26:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this was a box I created to be launched with a weather balloon for the eclipse. Cameras were pointed toward the sky the ground and also toward one side. this was created to be press fit, however, due to the vertical orientation of the main case when printing a zip tie was needed to hold the camera as the circle for the lens got deformed. This was designed in a way that the case can be attached to the balloon but the user would still have access to the cameras up until the time of launch. the main case was created to hold a GoPro Hero 2 while there are two caps, one is for a Hero 2 while the other is for the GoPro Black 7.

The case was not recovered after the launch as the tracker got disconnected during the decent.