3dsjs

H0比例建筑教学风格

TUTOR STYLE BUILDING HO SCALE

2024-04-24 04:58:55

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This TUTOR STYLE BUILDING in HO scale can be printed to offer many different configurations. Flat roof, two versions of hip peak roof style. I've included three different doors and three different window designs.

I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished.

Here's an interesting point for me to bring to your attention. Every model that I have designed is based on real world measurements and therefore each building is interchangeable with other structures. Simply bring the .stl file into any CAD program, even the wonderful TinkerCAD and combine to make a completely new design to 3D print.

If you would like me to design a custom model for you contact me directly at:

garylavart@yahoo.com.

It is totally free but I will post it on Thingiverse for others to print and enjoy.

Happy modeling,

Gary Lavarack - 3Designer

Print Settings

  • Printer brand:

    Prusa

  • Printer:

    I3 MK3S

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    Normal
  • Infill:
    Normal
  • Filament brand:

    Prusament

  • Filament color:

    White

  • Filament material:

    PLA

Tags

License

CC BY-NC-SA

TUTOR STYLE BUILDING HO SCALE
by garylavart is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

H0比例建筑教学风格
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com