项目16 巴隆娜80

project_16_balconera80

2024-04-24 20:18:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For all those who have taken a hydroponic path on the dark side (soil cannot be controlled) or as a cover against water.

It consists of 5 parts.
Part 1,2,3,5 no support
Part 4 with support (organic)

Prints part 1,2,5 with the top side on the print bed

I would sand the "L" joints of Part 1,2 slightly so that they are easier to insert.
It can hold at least 2kg per plant. If this is not enough, you can glue part 1 and part 2.
Alternatively, I might add a support. Depends on your comments and experience ;)
Part 5 is necessary because when the water level is high, the balconera expands in the middle and lets light through into the water. (If light shines on the water, algae form).

The holes are exactly 95mm in diameter (slightly rounded).
So that an 11cm growpot from elho fits in (and protrudes slightly).
I modified the pot with an old soldering iron. Larger cut-outs for the roots

can be found here:
https://www.elho.com/de/produkte/green-basics-anzuchttopf/green-basics-anzuchttopf-11cm-baumwolle/

or in a local hardware store

When installing, lift up the handles once and then insert part 1 and part 2.
I would remove the cover at the water level (the transparent tube at the top with the "min" and "max" labels).

Printed in Petg black so that it is lightproof. (Other colors let light through)
Top 4 layers.
Bottom 4 layers.
vertical contours or wall thickness 3 layers
25% infill.

Printed with Sunlu PETG black on my Qidi Xmax 3

It's version 1 so I'm open for suggestions ;)