944NA 静脉输液导管
944na IAT tube
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
intake tube with an IAT port for the early 944 (na, can also be used on later 924s)
additional tools required:
- 6mm x 1.0 (m6) tap or bolt that can be used to thread the mounting holes
- 3/8" NPT tap to thread the IAT hole
- glue/epoxy (if printing base separate from tube, see below)
there are 2 different print options:
- run one large print ("944na IAT intake tube complete.stl")
- run two split prints ("944na IAT intake tube.stl" and "944na IAT intake base.stl")
once printed, you'll need to tap the 4 holes on the base for the m6 bolts coming from the air box; and tap the larger IAT hole on the tube itself for 3/8 NPT. if you opted to print the base separate from the tube, glue them together by slotting the tube end with the short/narrow end into the recess on the base. let it dry/cure and you should be good to go! depending on the filament and infill, it may be worth sealing the entire exterior to prevent air leaks.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-5 Plus
- Supports:Yes
- Infill:50+
- Filament brand:
hatchbox
- Filament material:
ABS, PETG
Tags
License
944na IAT tube
by goose04 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Yoto玩家卡持有者2023-09-16 -
梅赛德斯G级越野车钥匙扣2024-03-17 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
无图标 H1 - Heltec V3 外壳2024-04-15 -
简约设计门把手适用于QIDI Q1 Pro2024-05-03
最热下载
-
车身RC 1/10 全套2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Dado - 立方体模型2024-03-24 -
拒绝的手势2024-04-19 -
沙箱建筑模型2024-05-08
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
用于加长杆的戴森配件支架2025-07-17 -
裸女站立2025-07-16 -
天使和恶魔2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24