轮椅扶手支架

Wheelchair Handle Stent

2024-04-28 21:03:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A light wheelchair frequently comes with a couple of annoying mechanisms who allow to detach the handles of both sides. These mechanism are not only redundant, but tend to break a lot. Once even just one of them breaks, most people will opt to get a new wheelchair.

Well, if you have a 3D printer, you have an alternative: You can print a stent that will replace the mechanism altogether. So should you want to remove an handle, it will still be possible, but you will need a hex key.. At least it will not break so easily (and if it does, you can always re-print).

This model of a stent has four holes in different heights so that you can roughly adjust the height of the handle. Also added the blender file, so you can make as many holes in it as you like, before you print.

I recommend printing with 100% infill and in PC, as you'd wish this part to be as strong as possible. In addition, printing the part horizontally, will make the laminations vertical, further adding to the part's rigidity.