内置式 KCDI-101 开关箱

Inline KCDI-101 Switchbox

2023-03-26 20:39:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I took some inspiration from: https://www.thingiverse.com/thing:4818473
nI don't consider this a remix because I used no part of the original files. This design also attempts to instead use the snap-in feature of the switch itself. It is not designed to be very serviceable as it's a pain to remove the bottom plate and the switch itself.

The stress relief is designed for a 4 mm diameter cable. Just enough space is provided inside for such large cable. I personally used hot melt to isolate the switch wires and keep the cables in place, but I am not kidding myself into thinking that this will be very durable. There wasn't enough room to make knots at either end.

I provided the FreeCAD files as well for anyone wanting to remix.

EDIT 4/25/2021
nI updated the ridge in the top piece in order to reduce the amount of supports needed to print. Now it can be printed upside down with support settings for "only touching build plate".

内置式 KCDI-101 开关箱

朋友，你觉得上面这个模型，属于下面的哪个分类？