CR10SE雪山小型支架与风扇管道组合

CR10SE Sherpa Mini Mount & Fan Duct

2024-04-29 01:37:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I am in the process of freeing my CR10SE from its original board, tool head board, the heavy extruder and print head cover. I want to switch to the Sherpa Mini as an extruder and the board will be an SKR Mini E3 V3 Mini or Manta-E3EZ, which will then run Klipper natively. So I created a rough and possibly functional prototype with TinkerCad. https://www.tinkercad.com/things/59GtwJttBX4-cr10sesherpaminimountfanduct?sharecode=PgpzqV5aQ38rAyvxnb7N6mo80udBtZde6t2K2xcpY0w The original parts were used as far as possible, except for the prtouch part. The fan mounting is not really stable. I also haven't thought about cable management yet. Maybe someone would like to take up the idea, test it and/or improve it.

The fan duct must in any case be made of temperature-stable filament. ASA/ABS

I haven't tested it yet!