经典小孩骑行式tractors前叉

Vintage Little Tikes Riding Tractor front fork

2024-04-29 05:23:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Front fork for vintage Little Tikes Riding Tractor (pedal tractor). This is the just fork piece. Made in two parts to fit printer. Will need to sand down threads on post part to fit into the bottom piece (1st time using CAD to build using threads). Less infill may be used so that you can drill screws into the piece. I hope this helps anyone needing this piece! I made this to replace the broken piece from a 30 + year old riding tractor.

PLA

Walls 6

Infill 10%

To fit my build plate I printed the top piece at an angle with supports.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 KE
Supports:
Yes
Infill:
10%

Post-Printing

Sand down the threads of the post to fit in the bottom piece. Then glue the top piece and bottom piece together once you are able to screw the top piece into the bottom piece. Be careful not to sand too much of the threads off.