Civic EG 165mm 中音/高音扬声器安装架

Civic EG 165mm midrange/tweeter adapter mount

2024-05-01 00:57:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I used it with Hertz CK 165 midrange driver/tweeter combo

Tweeter mount is only compatible with electric side mirrors but it's better to use the interior mirror cover for manual mirrors since it has hole in the middle for the cables (Interior mirror cover for electric mirrors can also be used but you will have to cut a hole in it). In either way you have to drill two 3mm holes for mounting it to the cover. Take your time to mount it in a correct angle. I didn't and it's angled down a little more than I would like.

The 165mm driver has to be used without the front "grill" cover otherwise it hits the cover on the door panel. The driver si mounted to the adapter with M4 screws and you have to use heat threaded inserts in the adapter. Also I recommed to put some foam between the adapter and the door.

I also designed the divider mount but I was not a good design as it was vibrating (divider is positioned in the only place I could think of placing it since there is not a lot of space between the door and the door panel). I now designed different one which uses two screws for mounting it to the door but haven't tested it yet. On this one you also have to use heat threaded inserts.
Photo is of the old divider mount.