Magnetic Channel Marker Reminder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Made this for my Uncle Charlie, to replace his existing, worn out channel marker minder.
Printed in plain translucent PLA, then the markers were spray painted individually. Magnets are aligned, then glued & inserted into the printed parts, let sit magnetically clamped to a piece of metal overnight. Magnets should be aligned identically, so that the magnets attract when the piece is aligned, and repel when misaligned.
Assemble with: qty 2M4x15mm screws, 4 qty6mm dia x 3mm button magnets. Note: you can use only 4 magnets (2 inside the base, and two inside the swingarm, but it won't work as well at an angle).
To be affixed to the console with adhesive strips (not shown).
Demonstration Video
License
Magnetic Channel Marker Reminder
bybeer2boltsis licensed under theCreative Commons - Attribution - Non-Commercial - No Derivativeslicense.
相关内容
联系我们
热门推荐
-
负数块键盘升起2023-04-26 -
90毫米高射炮原型汽车架装炮2023-05-14 -
雷诺·达奇亚车门扬声器雨盔2024-04-04 -
多板结构胶带夹持器2024-04-30 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
完全可打印的无人机框架2023-05-31 -
智能骰子滚动器2024-01-06 -
Dado - 立方体模型2024-03-24 -
GTA 5 大地图模型2024-04-21
最新模型
-
龙珠孙悟空，无需支撑2025-07-19 -
HGX lite v2支架2025-07-18 -
高跟鞋鞋架2025-07-17 -
一体打印行星齿轮2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24