带储存管的国际象棋模型

Chip Chess With Storage Tubes

2024-05-01 06:08:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This chess set is made of token-style pieces, each with a diameter of 38.5 mm and a height of 3.3 mm, comparable in size to standard poker chips.
Includes two types of storage options: a cylindrical tube and a rook-shaped case, each equipped with a secure screw-top lid to safely contain your pieces. I've included an alternate rook-shaped containerwithoutthe threading, for easy access if it's not going to be traveling anywhere. Any of the individual case configurations will hold all 32 pieces needed for a game.

Print a set of pieces, swap filament and print again for two unique sets.

The Rook Case Top, threaded or not, is the only part that requires supports.

I'm happy with how the pieces feel as tokens, you'll find yourself riffling with your dead pieces like poker chips.

This set does not include a board, but will work well on standard boards with 50 or 60mm squares.

I tried using Cura's Ironing on the top layer of one of my sets, but I wasn't particularly happy with the result. Your mileage may vary.

I originally had the tokens designed as double-sided, with the thought that a textured build plate could help differentiate opposing sides if you only had one filament on-hand. However this made build plate adhesion a little dicey, so these pieces are single sided only.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm Layer Height
Infill:
20%
Filament brand:
Elegoo
Filament color:
Gray
Filament material:
PLA
Notes:
The other filament I printed pieces in was eSUN Bone Color PLA+
This roll however was a little old and has taken on moisture so resulted in some imperfections.