3dsjs

Supafly Flipmini摄像头支架

Supafly Flipmini Camera Mounts

2024-05-01 08:43:42

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Supafly Flipmini Direct Camera Mounts

Direct mounts for action cameras on Supafly Flipmini

Changelog:

  • [19/03/2024] Support 2+ cameras: Runcam Thumb Pro W and Insta360 Go2
  • [23/03/2024] "Runcam_ThumbPW" has been modified to eliminate in-frame appearance.
  • [28/04/2024] Added “Insta360_Go2” fully protected mount

Features:

  • Features Lite versions for extra weight-saving
  • Check the file name for ECO, meaning less support is needed. Better print quality for poor-performing printers

Weights (±1g):

  • [Runcam_ThumbPW] 8g
  • [Runcam_ThumbPW_Lite] 3g
  • [Runcam_ThumbPW_Lite_ECO] 3g
  • [Insta360_Go2] 7g
  • [Insta360_Go2_Lite] 4g

Comment or message me to request a model for your camera

Most up-to-date versions of my models are on my printables, link in bio.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3

  • Rafts:
    Doesn't Matter
  • Supports:
    Yes
  • Resolution:
    Default or finer
  • Infill:
    100%
  • Filament brand:

    Doesn't Matter

  • Filament color:

    As you like

  • Filament material:

    TPU

  • Notes:

    Print Settings

    • Printer: Creality Ender 3
    • Filament material: TPU
    • Layer height: Default or finer
    • Wall Ordering: Outside to Inside
    • Supports: Yes
    • Infill: 100%
    • Infill Pattern: Hexagonal/Tri-Hexagonal
    • Nozzle Temp: 230°C
    • Bed Temp: 60°C
    • Print Speed: 80-100mm/s
    • Rafts: Doesn't Matter
    • Notes: Lay the model on its back to print

Tags

License

CC BY-NC-ND

Supafly Flipmini Camera Mounts
bypaultsanghyis licensed under theCreative Commons - Attribution - Non-Commercial - No Derivativeslicense.

Supafly Flipmini摄像头支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15