纽波特NK180/300把手

Newport NK180/300 Handle

2024-05-02 04:26:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an accessory for the Newport Vessels NK Throttle.

The NK180 and the NK300 both come with a tiny throttle lever that is a bit inconvenient to use.

The pictures above are printed in Carbon Fiber Polycarbonate(PCCF)
and while the picture has my initials on the throttle, the STLs included have that removed.

This part was designed to lightly slide over and use a M5 bolt and nut to secure it to the throttle. No modding needed.

Although this part should be fine in any filament type i would NOT recommend PLA given the nature of this hobby.

When Printing this part. Just place the Flat side down and use supports for the internal part that slides over the nk lever. No specific supports type of supports needed.

Parts needed are:
1x M5 x 20mm Bolt
1x M5 Nut

I will be doing a Limited amount of commissions for this item as well as my NK Base plate. Linked Here:
https://www.thingiverse.com/thing:6604233

If interested just message me though thingiverse for a quote. I have tons of colors in ABS and black PCCF. I will also include the hardware needed to mount.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
.2mm Layer Height
Infill:
30% or More
Filament brand:
Any
Filament color:
Any
Filament material:
PETG, ABS, PC, NYLON
Notes:
Given the nature and use of this item where the kayak will be exposed to heat outdoors. I'd use any filament that has a higher melting or transition temp then PLA. I would NOT recommend PLA for this project.