(MonoPrice Select Mini V2) 升级版热端冷却器带喷嘴LED

(Monoprice Select Mini V2) Upgraded Hotend Cooler with nozzle LED

2024-05-02 16:28:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

(MonoPrice Select Mini V2) 升级版热端冷却器带喷嘴LED

(MonoPrice Select Mini V2) 升级版热端冷却器带喷嘴LED

Summary

Here is my design for the Monoprice Select Mini V2 hotend cooler. It features a larger part cooling duct and nozzle LED mounting to make it easier for you to see your print.

Below is the list of hardware that you'll need to make this design work:

Two 3mm LEDs
Six M3x16 screws (2 for attaching to the other half of the housing, 4 for the fan)
Four M3x6x4.2 heat-set threaded inserts
One 40mm fan of your choosing (I recommend Noctua)
Some thin gauge wire
2 resistors suitable for your power source and chosen LEDs

Feel free to snip off the little wiring loops on the sides if they're not your cup of tea.

The fan grill I'm using can be found herehttps://www.thingiverse.com/thing:2203044

Print Settings

Printer brand:
Monoprice
Printer:
Select Mini V2 (E3D)
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
30%
Filament brand:
Duramic3D
Filament color:
Black
Filament material:
PLA+

Tags

hotend cooling monoprice select mini MPSM

(MonoPrice Select Mini V2) 升级版热端冷却器带喷嘴LED

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载