Dwarf II 滤镜/适配器箱

Dwarf II filter/adapter case

2024-05-04 08:35:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This will hold a Dwarf II filter adapter with filters attached. It doesn't really clasp shut, but you can use twist ties or rubber bands at the ends to hold it shut, or just put it in the zippered compartment on the top if the telescope caring case to keep it closed. (Its primary purpose is the keep the filters clean when repeatedly adding and removing them, like when taking solar images daily.)

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
50%
Filament brand:
Hatchbox
Filament color:
White
Filament material:
TPU
Notes:
TPU is recommended to prevent scratching anything, and is mandatory if not snapping/cutting the two halves apart.

Post-Printing

After printing and removing from the bed, apply it upside-down to the heated bed (with the two small protrusions hanging off the edge of the bed), wait for the TPU to soften, remove it from the bed, fold it shut, and place it on a table with something on top of it to keep it closed as it cools.