零探头夹具

Zero probe holder

2024-05-05 00:21:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Genmitsu 4040 Pro CNC router is far easier to set up if there is a zero probe for the cutting tool. The latest delivery of this router includes a probe, but the router frame has no place to stow it. The probe's 3-wire JST plug is not designed for easy or repeated extraction, so removal is unwise. Hence, a custom holder for the probe and its 2 feet of wire is needed.

The holder hugs onto the left X-axis structural cross-member near the the probe's control box and holds the probe and its wire.

Each Genmitsu CNC router has a different design so, this holder will only fit the 4040 Pro model.

Print Settings

Printer brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
Yes
Resolution:
.2 mm
Infill:
yes 25%
Filament brand:
MH
Filament color:
any
Filament material:
PETG
Notes:
A brim can be useful. There is no recommended material since there is virtually no stress on the holder. This design is in PETG because it was already in the printer.

Post-Printing

Amost nothing to do after printing.

After printing, the usual clean up of edges and removal of supports yields a usable part.

There is a depressed patch on the roof of the hexagonal arch for double sided tape should a secure anchor of the holder onto the CNC housing be desired

A production after-thought. The probe box bottom has a curved depression that matches the probe's shape. The center of that could be cut out to allow easy removal of and cuttings that may land around the probe.

零探头夹具

朋友，你觉得上面这个模型，属于下面的哪个分类？