深水员敬礼
Helldiver giving salute
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Helldiver giving the official salute.
Model is made in Blender (I will not share this) and is not water tight, so use a proper slicer like Cura that do not care too much about water tight models, to print it.
The model does not include a cape, as that would make it impossible to paint the back. So make a cape out of fabric. I might model a separate cape later that can be attached if there are any requests for this.
Model is made in 1/10th scale so about 19 cm tall. I exported it in high details and it can easily be printed in 200% size and still be detailed.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:10%
- Filament brand:
Any
- Filament color:
White
- Filament material:
PLA
- Notes:
If you don't want the base plate, just lower the model into the build plate, so it disappears.
Use tree support for the overhangs.
Tags
License
Helldiver giving salute
bynivs1978is licensed under theCreative Commons - Attribution - Non-Commerciallicense.
猜你喜欢
联系我们
最新模型
-
Keebio Iris 15度弯曲中间层2024-05-08
-
戴森V6 V7吸尘器软垫条端盖2024-05-08
-
柔软安全的大型模型箭头部2024-05-08
-
简易蘑菇模型2024-05-08
-
Taco Bell Chess Set: Queen Piece 3D模型标题2024-05-08
最热下载
-
21700毫安电池单元保持架2024-04-06
-
远投笼2024-04-06
-
Woods Mower 30922 护盾保持者2024-04-24
-
幻想磁力2024-05-03
-
F1赛船3D模型固定文件2024-05-08