迷你抓手MC4 3D模型

Mini Claw MC4

2023-03-26 11:22:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

只是一把小型 Talon Claw T4。

I wanted a reliable springer that can run lighter springs and shorter barrels specifically for indoor games so I made this remix of the Talon Claw T4. Uses 3 Caliburn C4 sized aluminum flatbar running the whole length of the blaster.

I run a 10kg OOD Retaliator spring in mine and get roughly 130fps with fresh bamboo V2 darts; I've included files for an optional spring guide for this spring. It has a 73mm draw length and will fit any spring that compresses down to ~30mm.

Uses standard Captain Slug fasteners. Plunger tube needs to be cut to a custom length of 109mm, or you can use an ESPER length plunger tube + the printed plunger tube spacer. Files are included for a 3D printed ramrod and priming bars. Haven't had any issues using a printed ramrod and priming bars, but I haven't been using this blaster for long so use at your own risk! Alternatively you could use the prints as guides to make your own aluminum flat bars and cut down a regular Talon Claw ramrod.

Parts are not oriented correctly, please see Captain Slug's assembly instructions for proper print orientations if you are not sure (http://captainslug.com/nerf/T4Assembly1.pdf). Assembly process is almost identical to the Talon Claw T4.

Inspired by Ehdrien

迷你抓手MC4 3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？