滚动托盘（带转移喷嘴）

Rolling Tray w/ Transfer Spout

2023-05-10 23:27:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This small tray is easily printable in just about any material, although I recommend printing in PC-ABS, PC, ASA, ABS, PLA for a shiny, durable tray that is easy to clean. PC-ABS by Polymaker is my personal favorite for such things. If you want the smoothest top finish, you can use the ironing setting. Keep in mind this setting increases the print time by quite a bit.

The tray features sloped sides to make things easier to collect, and also has a small spout in a corner so you can transfer anything you put on the tray back into storage. I use this tray daily, and its quite effective for what I use it for. Lastly, you can change the scale of the model in your slicer program of choice if you prefer a larger sized tray.

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
Can be printed in nearly any material easily, no brim, no rafts, no supports required. I recommend using a filament that has a smooth finish such as PLA, ASA, PC, etc.