Master Chief魔方核心M3螺丝孔混音版本
Master Chief Rubik's Cube Core with M3 nut hole remix
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I was worried the plastic would wear out quickly when the screws were screwed into the plastic, so i made a hole for a M3 nut (also a M3 locking nut will fit, i did make a hole for it to fit).
This was prompted by me miserably failing at melting a nut into the print before.
And this works!
I needed to press-fit the nuts (i used a vice, since you cant really do it by hand) and then glued them into place with some super glue, you can press together this part pretty hard without it breaking.
Any way, thanks to the original author reavenk.
Go check out his creations, they are pretty superb!
Post-Printing
Tags
License
Master Chief Rubik's Cube Core with M3 nut hole remix
by Jubblator is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
球体机器人（彩蛋版）圣诞装饰品制作工具2023-03-26 -
基斯·西蒙斯 Chibi KISS2023-07-25 -
极星隧道衬垫2024-01-05 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
最热下载
-
怪兽大战：1998版2023-03-26 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
GLOCK 17型手枪2024-05-03 -
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理2024-05-04
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
高跟鞋鞋架2025-07-17 -
兔女郎半身像2025-07-15