8BitDo超薄型手机支架

Slim 8BitDo Ultimate Phone Mount with Modular Mounting System (with ports for USB and D/X input switch)

2023-03-26 15:15:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Edit: The two files are very similar. The only difference is I made the USB-C port hole slightly bigger to hopefully accommodate the wired version of the controller, however I cannot test if it works and I'm not sure if the wider hole would affect the strength of the print without testing.

A lot of thought went into this redesign of "8BitDo Ultimate Phone Mount with Modular Mounting System" from printables.com. Thank you jerwil and akmiller01 for the original models and concept.

What's different with this version?

Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so your knuckles no longer rest on the sharp corners of the print. The clip on bottom of controller is much narrower and further away from d-pad, giving your fingers more room. Essentially your hands should no longer have to fight the mount for real estate.

Less Material: The slimmer, lighter design is only 2/3rds the weight of the original. Weighing in at exactly 10 grams, but the added thickness to the top hook creates greater surface contact and a tighter fit, so despite using less material it has a firmer hold and less wobble.

Added Convenience: Two holes have been added - one to access USB-C port for wired controller/charging. One more hole on the back to access the X-Input/D-Input toggle, so you can switch between the two modes and/or use the USB port without removing the clip from your controller.

8BitDo超薄型手机支架

朋友，你觉得上面这个模型，属于下面的哪个分类？