焊接烟雾吸收器

Fan or Soldering Fume Extractor

2023-06-21 04:35:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix from SethBon fan

I've done some modifications to add a USB-C power delivery chip adapter to put 12v on the fan from usb-C!
It's more common to have a usb-C charger/dock-in/battery than a DC-jack power nowadays!

My fan is to loud at 12v, with the chip I set it to 9v and it's perfect on the desk! It works on classic 5v usb too with this chip.

A upgrade can be to put a switch on the box to control one of the 3 dip switch to pass on 9 or 12v or let to 12v and add a PWM controller for the fan

Required hardware:
(1) 140mm fan
(8) PC fan screws 5x10mm
(1) 12VDC power adapter
(1) USB-C Power Delivery adapter
(1) DC barrel jack 5.5x2.1mm - panel hole 8mm diameter
(1) Power switch - panel hole 12mm x 18.7mm
(1) 3-pin or 4-pin fan connector or simple DIP PIN
Wire and soldering tools
(Optional) Heat shrink tubing
(Optional) Carbon filter