50毫米腰带/背包带或皮带扣，无支撑设计，3D打印优化
Strap, backback or belt buckle, 50 mm, no support, 3D printer optimized
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a buckle for belts, (back)pack straps and similar.
The design is based on isoceles trapezoids and then extruded into 3rd dimension. The buckle is self locking under load, needs no support and has no moving parts.
Originally sized for 50mm strap but can be easily scaled to the needed size. If you have issues with clearances, simply shrink the male side to around 95% size of the females size.
Printing with 20-30% infill should give sufficient strength.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO Neptune 2
- Rafts:Doesn't Matter
- Supports:No
- Infill:30
Tags
License
Strap, backback or belt buckle, 50 mm, no support, 3D printer optimized
by Chopski is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
平衡飞行器2023-05-06 -
Heroscape桥墙2024-01-10 -
汤姆森GO5200进入空气导管2024-03-25 -
抗压模型2024-04-17
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GPD Win3 把手型号2023-04-07 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
完全可打印的无人机框架2023-05-31 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
性感美女3d人像（带基座）2025-07-17
