雪佛兰·玛蒂兹空气导风口手机支架（无需螺丝安装）
Chevrolet Matiz air vent phone holder (no screws)
2023-07-22 11:12:25
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
- This project is a socket for a ball and socket joint style accessory which can be fitted in a dashboard air vent hole of a Chevrolet Matiz/Spark or any other car with the exact same vent nozzle.
- Compatible with https://www.thingiverse.com/thing:4750441
- Based on https://www.thingiverse.com/thing:4739696
- Requires you to remove vent nozzle from dashboard to install.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:Yes
- Resolution:0.28mm. **Note**: Using adaptive layer height is advised specially for the threaded part. threaded part <0.2mm
- Infill:20%
- Filament brand:
Any
- Filament color:
Any
- Filament material:
I used PLA in the picture. But choosing something more heat resistant is required, because it can be pretty toasty in a car. >80 degrees celsius. For example: ABS, ASA or PC
How I Designed This
Design files
Tags
License
CC BY-NC-SA
Chevrolet Matiz/Spark air vent phone holder (no screws)
by neotje is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
二战时期德国的可移动防弹室3D模型2023-03-28 -
Nintendo Switch Joy-Con 挂钩2024-03-13 -
Tractive 40mm颈带夹具2024-03-30 -
自动鱼饲料投喂器2024-04-06 -
官方Ender 3 V3 SE床水平测试模型2024-05-02
最热下载
-
全能3D打印机测试2023-03-26 -
E3D火山喷嘴2023-05-26 -
Dado - 立方体模型2024-03-24 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03 -
GTA 5 大地图模型2024-04-21
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
HGX lite v2支架2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
艺术雕像（女性）2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16