2部分120毫米风扇支架，厚度为2毫米
2-part 120mm fan spacer - 2mm thick
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I took diarx's model and split it in to 2 parts - helps massively with SFF builds or any case where fans are mounted on side by side rails where the crossbar may interfere with other items.
Used in a FormD T1 to move the exhaust fans closer to the exhaust panel without taking up any volume below the fan that can then be used for cables or similar
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2MM
- Infill:0
- Filament brand:
Creality
- Filament color:
Black
- Filament material:
PLA
- Notes:
Print with a brim if it peels, printed a batch of 4 in cold weather and some lifted slighty, which was remedied with the brim as the model itself has very low surface area on the print bed
Tags
License
2-part 120mm fan spacer - 2mm thick
by Rubble_ZA is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
AeroPress咖啡豆磨碎器适配套件2023-03-26 -
藏身载具：VKB战斗者装备2024-03-18 -
特斯拉Model Y（及Model 3？）座椅轨道末端盖2024-03-19 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
Ikea 米兹顿 插嵌2024-04-20
最热下载
-
Valorant 杰特的姿态2023-03-26 -
车身RC 1/10 全套2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
鞋带锁2025-07-17 -
裸女站立2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24