rg353v外壳

rg353v Case

2023-07-23 11:57:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a semi fitted protective shell case for the rg353v retro gaming system. The case is designed with room to add in stick on EPA foam sheets commonly available from Amazon and craft stores to pad the system. The pivot wings to hold it in assume m2 flat head screws no more than 12mm long, the holes printed for them may need to be drilled a bit to allow the screw to tap in (depends on your material and printer.

the case allows charging the unit while stored.

I printed mine in PLA and it seems to hold up just fine in my cargo shorts pocket. Walls of the unit are 2mm thick.

The shell can be printed upright with no support material.

The EPA foam I used inside of mine is the Amazon stuff that comes in sheets that are cutable on a cricut. (maybe 1.5-2mm thick).