RG纳米盒 - 原地打印

RG Nano Case - Print In Place

2024-04-08 01:17:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to design something with print in place hinges so it ended up being a case for my Anbernic RG Nano. Possibly not the easiest as the size of the device meant to the hinges needed to be fairly small but happy how it turned out.

I test printed quite a few and never had a failed hinge however this will depend on your device. It'll need to be fairly well tuned. Printed off one final design and its been on my device for months.

You'll also need replacement bolts as it attached at the back via these screws, I did try a pressure fit version, but soon came loose and never fitted well after that. You'll need a M1.6 10mm machine screw, I got mine from eBay pretty cheap. This is the actual item I bought: https://www.ebay.co.uk/itm/162186669992