药丸制作机 000型号

Pill Maker - Size 000

2023-07-23 11:59:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This Pill Marker holds up to 16 size 000 pills, features a storage-equipped bottom tray for tools, and a removable top for easy pill cap placement. Pills sit flush with the top tray enabling you to easy brush (not included) pill contents into the casing and pack it down with the packing tool (do not over pack or pill casing can split). Pills stay secure when the top is removed, and the hole plug(s) can be used if fewer pills are needed.

If you are looking for other sizes check out my other designs: https://www.thingiverse.com/azurescens/designs

Questions and feedback are always welcome and appreciated

Print Settings

Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Filament brand:
Any
Filament material:
PLA
Notes:
Fusion and Step files included
- No supports required for any of the parts.
- precision is critical so use a filament like PLA that has a high dimensional accuracy.
- The hole plugs have a ridge to ensure they sit flush, they can be a tight fit depending on accuracy but should loosen up after a few uses. Use scaling on your slicer software if you are unable get them to fit properly

Tags

药丸制作机 000型号

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

酷睿精密水冷散热架
2023-05-09
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
300毫升Marinelli型号试管，适用于Radex Obsidian
2024-04-04
扩展后的钩编棋盘和更长的反向支撑
2024-04-08
Aarke饮品二氧化碳平台：外部CO2连接解决方案
2024-05-05

最热下载

最新模型