SUBARU SAMBAR 标志灯/信号灯插座
Subaru Sambar Marker Light / Signal Light Socket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Designed to Replace the broken factory sockets on my 1991 Subaru Sambar KV4
The gasket is a little too loose, I will work on that at a later date
Disclaimer Be mindful that bulbs get hot, I wouldn't recommend using incandescent bulbs, because of the risk of fire. I take absolutely no responsibility for how you use this, nor the consequences of that
Print Settings
- Printer:
Ender 3V2
- Rafts:No
- Supports:Yes
- Resolution:.12mm
- Infill:100
- Filament brand:
Overture
- Filament color:
Clear
- Filament material:
PETG
- Notes:
I used a .2mm Nozzle and a .12mm resolution, you'll benefit significantly printing at speeds ~ 25-300mm/s
The Gasket should be printed in TPU
License
Subaru Sambar Marker Light / Signal Light Socket
by Raamgun is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
手机支架2023-03-26 -
简单乳房生成器 OpenSCAD 娃娃模型2025-07-15 -
WALL-E机器人 - 全部3D打印2023-03-26 -
锁匠工具套装GT2023-06-01 -
MTG 狐狸主题3D计数硬币模型2023-08-05
最热下载
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
Makergear M3 M2喷嘴标签2024-03-27 -
Arduino或5V继电器控制板固定架2024-04-02 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
幻想磁力2024-05-03
最新模型
-
新邻居你好！2024-05-08 -
尼琳替换式烤架2024-05-08 -
NASA链甲接头2024-05-08 -
磁力USB盒2024-05-06 -
Marantz 功放支撑柱2024-05-06