3S 3P锂电池BMS持有器（18650电池-3S3P）
3S 3P lipo battery BMS holder (18650 battery - 3S3P)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650)
This is a clip in place holder for a 10 A BMS for a 3x3 3S3P lipo pack
It can be used with one of the million 18650 battery spacer or holder you can find here on printables, wherever you put at least 3 batteries toghter.
To firmly keep in place teh BMS you can use glue or better o made holes for a cable tie
PRINT HINTS : print stand up (like you will put with the battery vertical- see last image)
0.2 mm layer height (also 0.3 should work)
20% infill
PRINT 3 or 5 lines of brim!
this is the BMS I use : https://www.amazon.it/dp/B07T3B3F8X?psc=1&ref=ppx_yo2ov_dt_b_product_details (the rounded one), but for dimensions it quite common. In case you have different BMS just ask
Print Settings
- Notes:
PRINT HINTS : print stand up (like you will put with the battery vertical- see last image)
0.2 mm layer height (also 0.3 should work)
20% infill
PRINT 3 or 5 lines of brim!
Tags
License
3S 3P lipo battery BMS holder (18650 battery - 3S3P)
by maattia743 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
热轮车汽车展示架，模块化设计，可连接安装2023-09-07 -
保时捷968型号前置和（敞篷）后置 4英寸扬声器支架2024-03-23 -
Mulita 教育机器人 2.02024-03-25 -
巨魔头像 012024-04-21
最热下载
-
Valorant 杰特的姿态2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
HGX lite v2支架2025-07-18
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
泡泡底拖鞋2025-07-17 -
裸女站立2025-07-16 -
大码动漫女战士2025-07-15