Ryobi 40v 除草机配件支架

Ryobi 40v Weedeater Mount

2023-07-25 08:25:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mount for a 40v Ryobi weedeater. I dont know what all it fits, and I don't know which model mine is because I couldn't find it written on it anywhere....

I realize these can technically be mounted on just a simple screw. But I like this better.

To be fair, it is still basically just mounting it on a screw, but the guide around the screw is a little nicer.

The wings on the side just help align it quickly and easily when putting it up.

You might want to pre-drill the screw hole a little more, as there really isn't that much plastic there in order for it to fit in the weedeater. While I was designing it and test prints, I definitely broke it apart when I put a screw in it and wasn't careful. I'm not entirely sure if my final print at higher quality + more perimeters was better, or if I was just more careful.

But drill out the hole a little just in case.

If it's not completely tight against the wall, since it's only held in with the one single screw, it might rotate a little slightly when you are taking it on and off the wall, but doesn't change anything.

If you print it and like it, please send a link or a comment. I am new to making things so it would be cool to know someone else used something I made.