风车花茎支撑物与花瓶（小型）

Tulip flower with stem stand & vase (small version)

2023-07-26 05:22:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a smaller version of this thing (https://www.thingiverse.com/thing:6086468) but when reducing its size the connectors did not work -one broke, the other did not fit.

So I took the STLs, rescaled them to 50%, reoriented the tulip flower and redesigned the connectors to make them work for the new size and easier to print.

The stem is now proportionally shorter because it doesn't go to the bottom of the vase like the original. I designed a base that fits/hangs at the top of the vase so it's easier to print and doesn't require a brim or anything. I removed the original connector from the bottom of the vase to reduce some material.

Print it with no supports and no infill (0% infill). Standard 2-wall printing works fine in PLA.

Total height of the kit is 125 mm or 4.92 inches.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0
Filament brand:
Grilon3
Filament color:
White, Fluo green, Bordeaux
Filament material:
PLA
Notes:
No infill. No supports. No brim nor rafts. Already oriented for printing.