帮助手基座设计

Helping Hand Base for Flexible Arms

2023-07-27 04:04:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a base for some flexible alligator clip arms I found on Amazon. They are magnetic, and you can buy a large metal plate base to attach them to, but that takes up a lot of workbench space, so I decided to make this thing instead. You just have to slot the bases of the arms into the back of this stand. It is a pretty tight fit (intentionally) so it might take some or a lot of force.

The base is fairly stable without a weight, but there's space in the front where you could attach something. I put my 1 inch tungsten cube on it for extra stability.

I printed this with the arches upright with their bases on the print bed. My printer did fine with no supports but you might want to enable them.

The arms I used are these: https://www.amazon.com/dp/B0BYZHPCTP/