硫酸钠排水套件 1号平方管

vat drain Kit 1" square tube

2023-08-06 01:11:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Vat holder and funnel kit for Resin 3d printers. The holder fits any vats similar in size as the Anycubic Mono x and the Elegoo Mars series, It is highly recommended to print in PETG because resin will dissolve pla over time. this is designed to fit 1in square tubing i picked up form the big box store.

Here is the square tubing I used. I used a hack saw and cut off a 12" piece but this can be adjusted for your needs

https://www.homedepot.com/p/Everbilt-1-in-x-48-in-Aluminum-Square-Tube-with-1-16-in-Thick-801307/204273940

No supports needed