3D打印机导线存储架

Filament Spool Holder

2023-08-07 00:17:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple and sturdy filament spool holder designed to fit nearly all spool diameters and widths.
The square base design flexes more than the single cross member design but my wife suggested that a square base could also be used as a book or notebook holder or for other purposes.

The 37 mm diameter rod raises the height of the spool so large diameter spools don't rub on the base.
The 33 mm diameter rod may be useful for spools with a smaller diameter center hole and to lower the center of gravity of the spool.
For faster printing you can increase the base speed to 80 mm and the travel speed to 150 mm and drop the infill to 5-10%
If you want to make the holder more attractive you may want to use rainbow colored filament.
Happy printing.