索尼A7II/A7R II 3D模型：电池握手套与外部电源接口扩展

Sony A7ii/A7Rii Battery Grip/Extender

2023-08-07 19:07:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Sony A7ii and A7Rii grip with integrated 18650 cells. It may suit other Sony A7 series, however I do not have any other models to verify if this will fit.

It is designed to fit the commonly available battery eliminator found on Ali Express as shown in the photos.

2023-09-03: Added another battery insert model for another type commonly available on AliExpress.

==Required==

4x M3x5
1x M3x15
9x M3x25
1x Sony Battery Eliminator (as seen in pictures, commonly available on AliExpress for cheap)
4x Li-Ion 18650 cells (can be recycled from old laptop batteries)
1x Mini toggle switch (Optional, this just a battery disconnect to extend life when in storage) - https://www.jaycar.com.au/spdt-sub-miniature-toggle-switch-solder-tag/p/ST0300
1x DC barrel jack for charging - https://www.jaycar.com.au/2-1mm-bulkhead-male-dc-power-connector/p/PS0522
1x DC barrel jack for output (optional if you wish to power external devices from the grip directly)
1x 2S Li-Ion 18650 BMS - Shown in picture, commonly available on eBay/AliExpress.
1x 8.4-9V DC power supply for charging

== Printing ==

All four parts are designed to be printed without supports. The battery insert is designed to be printed with it's flat back on the print bed. Because the sections are designed to be screwed together it is important that they be flat, it is suggested to print using a brim for all parts except the battery insert.

Printed using a 0.4mm nozzle in PLA on an Ender2.

== Wiring ==

This houses four 18650 Li-Ion cells wired in a 2S 2P configuration, that is, two sets of cells wired in series, then in parallel (see image) which is then connected to the BMS. If you are not familiar with basic electronics please do not attempt this project as I will not be providing detailed instructions on how to build this battery/grip.