SnapMaker J1顶部框架（带玻璃）

Snapmaker J1 Top Frame (with Glass)

2023-08-07 22:00:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The aluminum top cover of Snapmaker J1 cannot let me observe the printer's internal operations from above. Additionally, it needs to be removed when printing with low-temperature materials(TPU/PLA).

I made a frame to accommodate a glass panel, allowing for easy heat dissipation by simply pushing it backward when printing with low-temperature materials.

Open .3mf file using OrcaSlicer, where all the necessary parameters have been configured, including Mirror-mode printing and supports. The main parts will be printed using PLA, and PETG will be support. If you like these parameters you can download from here: (https://github.com/macdylan/3dp-configs)

You can order 5mm tempered-glass, but I personally use 4mm, which costs approximately 50CNY. The glass dimensions are 510x370mm with a radius of 20mm.

When using PrusaSlicer or OrcaSlicer for J1, you may encounter an issue where the screen fails to recognize the thumbnail and may require scanning the entire gcode to obtain printing information, sometimes the touchscreen may become unresponsive. So I made two tools sm2uploader and smfix:

Optimized gcode (no scanning) on the touchscreen
Model thumbnails
Smart pre-heat for switch tools, shutoff nozzles that are no longer in use, and other optimization features for multi-extruders.

If you typically use WiFi to upload gcodes in the slicer software, then you do not need the smfix. The sm2uploader already incorporates all the functionalities of smfix, so smfix is only necessary when using a USB flash drive.