定制数字键盘无线套件（LogiLink / MCSaite）- 自定义符号款

Custom Keycaps for Numeric Pad (LogiLink / MCSaite) Numpad Wireless - Custom Symbol - Transparent

2023-08-08 17:31:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made some custom Keycaps that fits for most Numeric Pad (Wireless) for example LogiLink or MCSaite. All of those Numpads have the same form, therefore those keycaps should fit for all other brands (with the same Layout). The Top Keycap were printed with transparent PLA with 2 Layers. thin and strong enough so a printed symbol can be seen trough. I got the best result with "lines" or "zigzag" (dont remember) - concentric looked uggly and it was harder to see trough. with a resin 3d printer i bet you can get even better results, but because i have only a delta printer i was still pretty happy with the results. It is also to print many Key Tops and bottoms at the same time. The Top clips on the bottom sometimes, but for permantent use you should place some glue on the backside. ofc you will no longer be able to swap out the symbol printed on paper, but you can make infinitly new keycaps and swap them out easly. If you have further questions just ask in the comments.