Bender Futurama 可拉伸版本2
Bender Futurama, stretchable, version 2
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an improved version of this https://www.thingiverse.com/thing:4660713/
For Calculon click here: https://www.thingiverse.com/thing:6160974
Futurama's Bender!
- Flexible limbs
- Slowly rotate his antenna to move his eyes and change mouth expression
Video (older version):
https://youtu.be/LM4eSuFtjz4
improvements:
- everything is now scaled and rotated ready for printing
- better connection of hands and feet
- thicker rod between the mouth and the antenna
- thicker antenna
- no thin corners of the mouth hole
- better door mechanism
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Filament brand:
Sunlu
- Filament material:
PLA
- Notes:
Body, Head, and tubes printed with 0.5 mm extrusion, other parts with 0.4. Sliced with Cura.
-
Antenna: I recommend to print the antenna out of PET-G with slow speed, to be more rigid, Other parts from PLA.
-
Eyes and mouth: - should be printed in light yellow color, other parts silver. Use a black cd-pen to paint SQUARE dots on the eyes and to paint the mouth.
-
Limbs: 36 pieces of the pipe are needed, I reccomend to print 9 pieces on a BRIM support 4 times. Put 18 pipes on a sweatpants rubber. Put them into one side of the body (thus right hand will be connected to right foot). Knots of the rubber can be covered with textile tape, see the picture.
- Door: When insreting, start with the bottom hinge, then push in the top one.
-
License
Bender Futurama, stretchable, version 2
by chorec is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
DIY自定义Avata无人机——使用原始DJI部件制作2023-03-26 -
![Goblin Wizard [Pre-Supported]](https://www.3dsjs.cn/api/utils/resourcehub?time=1767929594&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2Ff%2F4%2Ff40b5ac8c857425dc1b25ed3958007f8.webp&signature=12a3fa325676987de621437eebc23ff0)
Goblin Wizard [Pre-Supported]2023-05-15 -
统一制 PA6 NPL-Z-03 13.62024-03-29 -
3D模型: Lula2024-04-07 -
Ikea 米兹顿 插嵌2024-04-20
最热下载
-
人耳道2023-03-26 -
钥匙解码器（用于房门钥匙复制）2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
18650电池存储盒2024-04-18
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26