层叠设计蜂箱模型（圆形）

Stackable Bee Breeder (Round)

2023-08-18 17:34:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Make sure to print this with 100% wood Filament!
Plastic Filament will lead to a humid environment and the resulting mold can kill the larvae.
Printing with 100% wood Filament also prevents environmental damage through (Micro-)plastics.

Just stack on top of each other and make sure, the plates are kept somewhat sturdy together and place wherever you need some wildbees for pollination.

I personally used the Extrudr Wood Filament but other brands with similar composition should also work.
Set it to 0.2mm Resolution and use a 0.6mm Nozzle to avoid clogging (it should work with 0.4mm too but clogging might occur more often).

Best thing is: If you use the Extrudr Wood Filament it's completely compostable.

This thing absolutely works! Put it onto sunny sides, with easy access to all the friendly animals and within a few days, the first insects should show interest.