可携带式骰子塔

Tube-O-Dice: Portable dice tower

2023-08-19 04:54:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A portable dice tower that can also carry dice when closed. You can use up to 28mm max-diameter dice with the included STLs, but you can use Thingiverse Customizer or OpenSCAD to modify that. You can also change other aspects of the tower, like adding sockets for magnets (if you want the "tray" to stay in place better when it is in "tower" mode).

The tower is designed to print with no supports. All overhangs are short enough that they can bridge without major print flaws.

Note: The included STL files DO NOT have the magnet slot, but the pictures do. This is because I figured most people don't have the same magnets I do. If you want to use magnets, be sure to use Customizer to add the ones you need!

Update 11-13-23: Knurling and magnet toggles weren't working in the Thingiverse Customizer. The OpenSCAD file was updated to version 8 with a fix.