Airtag持有者

Airtag holder

2023-08-19 08:40:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this airtag case to have an airtag pressed into it, and be put onto a keychain. I printed mine using PETG to allow it to stretch and be more durable, although it might be possible to print the model using PLA. I hope to test this soon, although PETG would certainly be optimal. Print with 100% infill, no supports, and no raft (unless you hare having trouble with bed adhesion.) When completed, rest your airtag on top of the case with the metal side down, and make sure the case has the larger side facing up. Then, simply press the airtag into the holder. Be gentle, applying more force and making your way around the airtag until it rests perfectly inside of the case. Once you have pressed it in, put it on your keychain using the gap in the top. To remove the airtag, simply press from the backside.