门装挂衣架
Door Hanging Clothes Airer
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Left and Right Brackets for an 'over-dry' clothes airer. Will need a 12mm dowel to complete construction.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0.2mm Layer Height, 0.4mm Nozzle
- Infill:50% (not tested with less)
- Filament brand:
Creality HP-PLA
- Filament color:
Black
- Filament material:
PLA
- Notes:
Please Note: Requires a 12mm dowel to be used with these brackets (I simply used some Blu-Tak to hold the rail in place). The door will most likely need to be left open whilst in use due to brackets 3mm thickness.
This is my second iteration with reductions in material used.
You will need to download both the Left and Right files. They have been separated for easy arrangement on your print bed. I was able to print both of these at once using Cura's "One At A Time" print ordering.
It may be possible to be printed with an infill of less that 50%, but I wouldn't recommend it.
My wife and I have been able to hang body towels on this rail to dry with no issues.
Final result
Tags
License
Door Hanging Clothes Airer
by Tset_Tsyung is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
可爱的大眼睛（手机版）无镜片3D模型2023-03-26 -
2023年度EDC手镯饰品2023-05-10 -
3D模型：Creality Ender 3 S1 Pro网络摄像头固定架2024-01-14 -
耳机架2024-03-20
最热下载
-
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
红米手表4号充电基座2024-03-15 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
花环戒指2024-05-08
最新模型
-
天使和恶魔2025-07-16 -
心形花瓶 Mother's Day 特别版2024-05-08 -
第二屏幕2024-05-08 -
Fcm书签2024-05-08 -
适用于任何步进电机的弹簧联轴器2024-05-08