三脚架式衣架底座
Tripod Base For Dress Mannequin
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
1-1 Replacement for a broken tripod base on this style of dress mannequin
You will need to extract the screw from your original mannequin. I used a soldering iron to heat it, then pliers to extract it from the original plastic. Cleaned up stray plastic, then re-heated and used plyers to push it into the replacement part. In the photos of this make the green part is a test print I used to practice moving the screw, if you are inclined to do the same just print the same part, but stop the print when it looks to be 10-15mm tall so you can use it for practice
I would recommend using ABS over PLA for strength
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:15%
- Filament brand:
Hatchbox
- Filament color:
White
- Filament material:
ABS
- Notes:
Using ABS is recommended for strength, but PLA seems to work as long as you don't overload the mannequin
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
叫我可爱吧（带刀的鸭子卡通）2023-03-26 -
声学吉他调音钩 3D模型2023-04-23 -
Pen Case 外壳2023-05-14 -
冲击RC微型顶点4英寸GoPro英雄支架2023-05-14 -
经典版 Omnitrix V22023-05-15
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
E3D火山喷嘴2023-05-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Apple鼠标 - M0100 3D模型2024-03-25 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
高跟鞋鞋架2025-07-17 -
裸女站立2025-07-16 -
一体打印行星齿轮2025-07-15 -
私密羞羞娱乐骰子2025-07-15