露地遮阳伞桌支架
Patio Umbrella table shim
2023-08-20 06:02:25
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
We found the hole for the umbrella in our new patio table was 2" wide, but the pole for the umbrella was 1.5". The result was a wobbly umbrella.
This shim holds it snugly in place. It's designed in two halves, so you can put it in place after setting up the umbrella.
Print Settings
- Printer:
Shapeways
- Rafts:No
- Supports:No
- Resolution:0.1mm (per Shapeway's spec)
- Infill:yes
- Filament brand:
Shapeways "Versatile Plastic"
- Filament material:
Nylon(?)
- Notes:
This was printed using Shapeway's service. It may need modification to print with a regular FDM printer.
License
CC BY
Patio Umbrella table shim
by isonno is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
铝制转角圆角 20202024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
电脑风扇独立式模型2024-05-06 -
参数化设计的安全防护临时门锁插销2024-05-06 -
4" Duct to Flat Surface2024-05-06
最热下载
-
Gyro Air旋转空气模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
Dado - 立方体模型2024-03-24
