海滩遮阳伞顶部

Beach Umbrella Tip

2024-04-12 02:18:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple Beach Umbrella Tip replacement part for a 22.5mm inner diameter pole.

There are two tips on offer here.

The first is a snug fit, it may need to be glued into place.

The mk2 version is 23.mm diameter and will need to be hammered into place using a Rubber Mallet. In doing so the Umbrella tube will strip away some of the wall of the part ensuring a solid interference fit that will not pull out easily.

I do suggest using a minimum of 3 Walls to give the tip some strength against wear and tear of being driven into the ground (sand or soil). It is only plastic so stay away from shingle, stony ground, that kind of stuff.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer 5M Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Filament brand:
Sunlu
Filament color:
Grey
Filament material:
PLA
Notes:
Use 3 Walls minimum to give strength to the exposed tip. I would also suggest using a Raft for the mk2 version as it has a tapered base.

Tags

License

CC BY-NC

Beach Umbrella Tip
by Hands0n is licensed under the Creative Commons - Attribution - Non-Commercial license.

海滩遮阳伞顶部

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型