轴向 SCX6 车轮固定支撑架 3D 模型
Axial SCX6 - Wheel Chocks
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I travel a lot with my SCX6 in the trunk; it moved around a lot on its tray. Adding these kept it in place.
You'll need to print two per wheel; you'll also need some ¼in rope/para-cord to connect them. I found it best to put the chocks around the wheels and then cut the rope so you can make knots and cut to length accordingly; you want a pretty tight fit.
You're looking at about 5hr 45min on a MK2.5S and 2hr 20min on a X1C. I'd recommend 20% in-fill and 3 walls as these will need to be pretty tough.
Print Settings
- Printer:
Bambu Lab X1C
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:20
- Filament brand:
Sakata
- Filament color:
Black
- Filament material:
PLA
- Notes:
I've found PLA thus far is though up to the task.
Tags
License
Axial SCX6 - Wheel Chocks
by silverbullet126 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Inscryption Cards - Hueforge - Stoat2024-01-12 -
Saab 7585540 3D模型2024-03-25 -
HTC Vive控制器支架2024-05-03 -
HGX lite v2支架2025-07-18 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
Valorant 杰特的姿态2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Delta设置校准为Klipper2023-04-23
最新模型
-
高跟鞋鞋架2025-07-17 -
裸女站立2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24