Miyoo Mini 可动防护屏

Miyoo Mini Articulating Protective Shield (non-plus)

2023-08-21 04:30:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Etsy Shop: http:epic-printing.com

Please note: You are welcome to print this for you or your friends, but I do not give consent for anyone to sell this design.

This is an articulating case for the Miyoo Mini (Non-plus). This is designed to protect the front of the handheld, without having to mess around witih a bulky case. I sell these in my Etsy shop along with cases for others like the Miyoo Mini Plus, RG35XX, Retroid Pocket 3+, RG353M, RG405M and others.

I use 1/16 inch metal pins for the hinges, but I'm sure you can figure out something. I do not recommend printing the hinges as they probably will not hold up long term.

You'll need to find longer screws, as the original screws are not long enough. M1.7 x 10mm is what you are looking for.

Etsy Shop: epic-printing.com