Subaru EJ系列后部大密封环安装工具

Subaru EJ series rear main seal installer

2023-08-24 00:16:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a tool to install the rear main seal on a Subaru EJ-series engine. Dimensions are based off of the Subaru SST, with revisions to improve strength.

The tool includes the subtle lip to recess the seal slightly into the block so that the rear-most seal surface will not rub against the flywheel or pressure plate.

I recommend printing this with the seal side facing the build plate. This is my first Thing so I didn't realize it would upload upside down.

If you ever held the OEM Subaru SST, you know it's quite hefty. I wouldn't usually recommend 100% infill, but you may find it necessary for durability. Use a rubber-faced dead blow with this tool or else you'll likely crack it.

Remember to lubricate the inner seal surface where it touches the crankshaft, and pack that seal with petroleum jelly (vaseline) to decrease the chances of that spring from popping out.

Happy wrenching!